Powered work positioner is a common general purpose power lift stacker, which can make quick work of large quantities of moving and lifting jobs especially in narrow aisles and confined spaces, mainly used in pharmaceutical, catering, packing line, food processing, warehouse, office, kitchens, laboratories, retail outlets, etc... Feel free to send us email to tell us more about your requirements; we will reply you in 24 hours.
堆垛机类型:
作为专业堆垛机制造商多年,我们开发了各种堆垛机,如叉式堆垛机,电动堆垛机,半电动工作定位器,手动堆垛机,电动堆垛机等......
工作定位器技术参数:
模型 | ART075 |
类型 | 电动 |
容量(kg) | 150 |
负载中心(mm) | 235 |
叉高(最小 - 最大)(mm) | 130-1500 |
平台尺寸(mm) | 470*600 |
外形尺寸(mm) | 870*600*1790 |
电池 | 24V / 12AH |
净重/公斤) | 63 |
画廊
问答:
Q: How long is the warranty of the work positioner.
A: There is a one year warranty, and you can get free parts within one year from you get it.
Q: Can I use a longer platform with this work positioner?
A: We do not recommend using a longer platform with this unit, as the load center will be further away reducing capacity. If you really need a long platform, please contact us for a new program.Thank you.
Q: Can I buy parts for this work positioner?
A: Of course,all parts can be sold separately for the work positioner.
Q: How long the charge lasts, how long it takes to recharge, expected battery life, cost of replacement battery & does it come have an onboard battery?
A: A full charge will last at least 100 times fully loaded operation, it will usually take 4-6 hour to charge. The battery should last for 3-5 year, cost around $250 - $350 for the replacement battery, yes it includes an onboard battery.
Q: Does this positioner stacker has other capacity? Or can I have more high lift?
A: Yes ,we have different models with different capacity and lifting height of this stacker, you can let us know the real capacity and lifting height you need.
Q: Can it manually operate if the battery ran out of juice?
A: Sorry this lift cannot manually operate.
Q: Can I change the positioner to other attachments?
A: Yes, of course, but you have to choose our optional attachments for this stacker and we do not suggest you to change it to your own attachments which may not be supported. We can provide several optional attachments like spindle, double spindle,reel rotator and even V block, fork with hook, ball transfer and so on. So, please let us know if you have any idea and we can provide you with professional technical support.
工作定位器的功能:
√ 重量轻,机动性强
√ 非常适合狭窄的过道和狭窄的空间。
√ 适用于从制药到餐饮,从包装线到食品加工,从仓库到办公室,厨房,实验室,零售店等所有应用......
√ 自动电子过载保护系统确保安全。免维护和密封电池,自动充电器
√ 快速更换附件。
√ 自动制动系统可防止不受控制的降低
Stacker Accessories
售后服务:
a)每台设备都附带规格说明
b)1年有限保修
c)我们多年来一直在制造工作定位器。我们拥有专业,完善的售后服务团队。
使用前:
- 检查液压管路是否漏油
- 检查每个支撑轮是否正常工作。
- 检查仪表板上的电度表。严禁带电使用。
- 按下向上和向下按钮以检查半电动升降系统是否正常。
注意事项:
- 严禁在堆垛机行走过程中按上下按钮。
- 禁止快速频繁地切换上升和下降按钮。
- 严禁将重物快速装载到货叉上。
- 不允许超载
- 使用时,请确保货物的重心在两个货叉的中心
- 严禁长时间将货物放在货叉上。
- 严禁将任何人和身体的任何部位放在叉子下并搬运重物。
Semi-electric stacker charging considerations:
- The charging environment of the light semi-electric stacker is mainly clean, ventilated, and the battery can be taken out or the cover of the light semi-electric stacker can be opened if conditions permit;
- The electrolyte level of the light semi-electric stacker should be 15mm higher than the partition. Below this scale line, the electrolyte should be added in time to prevent the battery from losing electricity and affect the battery life of the light semi-electric stacker. The temperature of the electrolyte shall not exceed 45 degrees during charging;
- It is not possible to expose the open flame when charging the light semi-electric stacker. Because the battery will generate a lot of flammable gas during charging, the light semi-electric stacker will prevent fire during charging.
- Light semi-electric stacker should avoid skin and acid contact during charging. If there is contact, use plenty of soapy water or consult a doctor.
- The battery should be kept clean and dry in peacetime. It is not allowed to put other objects on the battery of the light semi-electric stacker;
- Waste batteries of light semi-electric stackers should be disposed of in accordance with national environmental protection laws.
堆垛机制造商:
作为各类物料搬运和起重产品的专业制造商,工作定位器是我们的主要产品之一。除此之外,我们还可以生产各种托盘搬运车,堆垛机,升降台,叉车,起重机等。如果您想购买电动办公室工作定位器叉车,您可以从本页面发送电子邮件给我们报价。如果您对我们的其他产品感兴趣,欢迎通过电子邮件或页面中列出的其他方式与我们联系。我们会在24小时内回复您。
相关产品
ART037 / ART038集装箱倾斜器
Container Tilter can increase productivity and help reduce back injuries associated with reaching and lifting heavy items from containers as its ergonomic design . Tilt angle adjustable from 0-90° and short operator reach allows easy access to containers, totes, and...